Aluminum Cut Wire
Chopped aluminum wire is mainly used for blasting, deburring of aluminum or magnesium molds and castings. Due to the relatively low hardness, there is no loss of material on the blasted object. Blasting is significantly less dusty and the blasted surface acquires a uniform, even, shiny structure.
Application
Blasting of aluminum castings
Packaging:
In 10 kg bags or 1t / big bag
Pressure blast machines
Wheel blast machines
Available sizes (mm)
Al06 | Ø 0,60 |
Al08 | Ø 0,80 |
Al10 | Ø 1,00 |
Al12 | Ø 1,20 |
* Other grain sizes can be produced if required.
Physical properties
Hardness | approx. 100-150 HV0,1 |
Grain shape | cylindrical/rounded |
Melting point | 630 °C |
Bulk density* | approx. 2,7 kg / dm3 |
* Depending on grain size.
Chemical analysis
AW5019 | AW6060 | |
|---|---|---|
Si | 0,30 - 0,60% | 0,30 - 0,60% |
Fe | 0,10 - 0,50% | 0,10 - 0,30% |
Cu | max. 0,10% | 0,1% |
Mn | 0,10 - 0,60% | 0,1% |
Mg | 3,00 - 7,00% | 0,35 - 0,60% |
Cr | max. 0,30% | 0,05% |
Zn | max. 0,30% | 0,15% |
Ti | max. 0,30% | 0,1% |
Al | rest | rest |